楼承板的特点
Characteristics of floor bearing plate
01适应主体钢结构快速施工的要求，能够在短时间内提供坚定的作业平台，并可采用多个楼层铺设压型钢板，分层浇筑混凝土板的流水施工。
01 adapt to the requirements of rapid construction of main steel structure, can provide a firm operation platform in a short time, and can adopt the flow construction of laying profiled steel plates on multiple floors and pouring concrete slabs in layers.聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛
02在使用阶段楼承板作为混凝土楼板的受拉钢筋，也提高了楼板的刚度，节省了钢筋和混凝土的用量。
02 in the use stage, the floor bearing plate is used as the tensile reinforcement of the concrete floor slab, which also improves the stiffness of the floor slab and saves the amount of reinforcement and concrete.
03 压型板表面压纹使楼承板与混凝土之间产生最大的结合力，使二者形成整体，配以加劲肋，使楼承板系统具有高强承载力。
03 the embossing on the surface of the profiled plate produces the maximum binding force between the floor bearing plate and the concrete, so that they form a whole. With stiffeners, the floor bearing plate system has high-strength bearing capacity.
04在悬臂条件下，楼承板仅作为永久性模板。悬挑的长度可根据楼承板的截面特性来定。为了防止悬挑板的开裂，需在支座处依结构工程师的设计配上负筋。
04 under cantilever condition, floor bearing plate is only used as permanent formwork. The length of the cantilever can be determined according to the section characteristics of the floor bearing plate. In order to prevent the cantilever plate from cracking, negative reinforcement shall be provided at the support according to the design of the structural engineer.